You need to look at the raw value (8) in this case. Instead the drive makes a note of the bad sector. Parameter is a critical parameter and indicates the current count of unstable sectors (waiting for remapping).
Madre de atacante de Columbine habla por primera vez del tiroteo CNN
My 8tb western digital hdd is showing errors in smart id 197:
Your disk has thousands of spare sectors used for.
A reallocated sector count above zero does not immediately mean that the hard drive is going to fail, but it can be an early warning sign. The raw value of this. I hinted at this earlier, but wikipedia's description of current pending sector suggests that the current pending sector count should always be zero after a full disk write. Description current pending sector count s.m.a.r.t.
[c5] current pending sector count: How can i reduce this? The raw value of this. Why is uncorrectable sector count being displayed as caution?
If a pending sector is written to and determined to be bad by the drive, it will be reallocated, and the pending count will go down, the reallocated count will go up.
Remapping the sector would not be a good idea because this would prevent recovery of it's data if a later read operation were to succeed. Description current pending sector count s.m.a.r.t. Parameter is a critical parameter and indicates the current count of unstable sectors (waiting for remapping). 100 (data = 8,0,0) after.
This is why when people ask about having some current pending sectors, the common. The raw value of this attribute indicates the. It can then reallocate a bad sector to one of the spares, and the sector is no longer pending.
